02-06-2024 11:28 AM
Recently, I am unable to focus my lens using the focus ring (stuck on infinity-when I turn the ring, nothing happens (R7 camera). When I try to use center point focus, the camera cannot focus on things closer than infinity. Sometimes Eye-detect works, but most of the time it doesn’t. Also, when I shoot in eye-detect mode, the first picture is sometimes good, but subsequent images lose focus. Thoughts?
02-07-2024 12:11 PM
When I turn the focus ring when the lens is off the camera, nothing happens in the focus window.
02-07-2024 12:16 PM
Even if you turn it both ways? Do you feel any resistance when turning it. The focus ring should turn indefinitely. You'll feel resistance at the end of the focus through. But it will keep turning.
02-07-2024 12:36 PM
Slight resistance when turning either way and no change in resistance even when turning the ring 3-5x around.
02-07-2024 12:39 PM
There should be a part where it turns smoothly without resistance. Until you get to the end of the focus throw. The focus ring will turn 360 degrees. But there is a clutch underneath the focus ring. It sounds as if your lens is broken.
02-06-2024 02:25 PM
Hmmm... thanks for that info.
Well, my first thought is to look at the configuration of the R7. Can you please check to see if you have the latest firmware updates for your camera? If not, I would suggest doing the update and retesting.
The other thing I would suggest is, after saving your current configuration to one of the C modes, is to do a camera reset and check to see how it is then performing.
02-07-2024 11:22 AM
I have updated the firmware to 1.4.0. I will do a camera reset today. I think I'll take it all the way back to factory settings just to be complete. I will post with the results.
02-07-2024 10:33 AM
I would do the reset and clear all custom settings too. I would not save your current settings because if that is the issue why would you want them back. I also doubt a FW update will accomplish any improvement unless it specifically mentions your specific lens.
Sorry to say but this may be user error.
02-07-2024 11:24 AM
Will do today...I agree that some of the behavior may be user error (or lens error compounded by user error), but I've been using this lens forever and the lack of being able to focus manually seems outside of the realm of an error on my part.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.