10-10-2020 08:52 AM
Hi everyone,
I just bought a brand new Canon 100-400 4.5-5.6 MK2. I have just put it on my Canon 6D. I am only getting F5.6 and not F4.5. Is there any setting i need to change?
Thank you
Solved! Go to Solution.
10-10-2020 09:31 AM
you need to zoom closer.
4.5 is the minimum at 100 mm, while 5.6 is the minimum at 400.
10-10-2020 09:31 AM
you need to zoom closer.
4.5 is the minimum at 100 mm, while 5.6 is the minimum at 400.
10-10-2020 10:04 AM
Thank you
10-10-2020 10:21 AM
Keep in mind a variable aperture lens is not its most wide open aperture 1mm below is shortest FL, 101mm in your case. It is a gradual decline for sure but a decline never-the-less.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.