cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Autofocus not holding

mforster86
Apprentice

Hi,

 

I have a Canon Rebel, I've had no problems with the lens that comes with it (18-55mm) but whenever I use the 50mm f/1.8 II lens it will autofocus when holding the shutter button partially but then when compressing fully to take the photo there is always a slight auto adjustment on the lens knocking it slightly off focus.  The only way I've been able to get around this is to autofocus then turn to manual focus on the lens before taking the photo.. which isn't ideal.

 

Any suggestions?

4 REPLIES 4

Waddizzle
Legend

Try setting the focus mode to One Shot.  The "AI" modes try to continuously update the focus until you press the shutter.

--------------------------------------------------------
"The right mouse button is your friend."

I'm not sure I entirely understand, do you mean changing it from multi shot to single shot? I can't see any settings for focus just white balance. The camera is a eos 300d

Strangely, I don't see how to set it when in P mode.

 

focus.jpg


@mforster86 wrote:
I'm not sure I entirely understand, do you mean changing it from multi shot to single shot? I can't see any settings for focus just white balance. The camera is a eos 300d

Good point.  What shooting mode are you using?  Try full AUTO shooting mode, as a test.  If the camera beeps when it focuses, then you are in One Shot mode.

--------------------------------------------------------
"The right mouse button is your friend."
Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.