02-24-2022 08:28 AM
My printers is starting put out smudgy printing. I have cleaned the printer heads several times it gets better but not clear as it should be. Can this be corrected or is it time to replace it?
03-16-2022 02:02 PM
Hi GotTo,
To clear up the printing issue that you are experiencing, please clean the encoder/timing strip. To do this, please follow the steps in the following article:
https://support.usa.canon.com/infocenter/index?page=content&id=ART143796
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.