11-07-2012 02:11 PM - last edited on 11-07-2012 11:34 PM by Naomi
How do I fix an error code b200 on MP560
10-06-2017 11:07 AM
After repeated attempts to fix the error on my 2 Canon printers, I finally found the definitive solution. I found both printers (hardly used) a new home at the town dump, and bought a Brother printer. No more printing problems!
10-27-2017 04:49 PM
Ok guys I tried all the little reset tricks , unplug hold power button, then maintenance menu ect. None worked- Solution~ Take the ink cartridges out -remove print head , comes right out clean with water until its clean making sure not to get water on the pcb electrical connection on back, to speed up the drying process I used a air pump to air dry in about 4 to 5 minutes. Replace everything when done. Works awesome. Btw I have the cannon m560 I love this printer its been solid for years and ink is cheap online. Good luck and just do it. Its very simple and took 10 minutes tops to do. peace
10-27-2017 04:51 PM
I fixed my m560, none of the tricks worked. Simply remove ink and header and wash with water making sure not to get the pcb electrical connector wet. Let dry completley when done "I used a air gun to blow dry mine in 5 minutes" . Put everything back and works perfect now. good luck
11-07-2017 06:48 PM - edited 11-07-2017 06:52 PM
Just wanted to update, After cleaning the in header out with water and air drying ect. It printed fine until the next time i went to turn on. Got the B200 error again. I removed the ink header again washed with water and air dried and bingo working again. This time after getting it working I went and did all the maintenance in the settings menu on the printer. Clean nozzle, deep clean header and header alignment. I am on day 3 now, I turn it on everyday so far and print with no problems. finger crossed
06-29-2018 10:29 PM
opening the cover just after turning it on before the error could pop up, waiting for the cartridges to move out about 1/3-1/2 of the way out then shutting the cover. Did the trick after isopropanol cleaning did nothing. So thank to whoever it was above who shared that tip!
Just finally got around to buying ink and it wasnt cheap. so glad this isn't a throw it out issues. yay for me, yay for the environment.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.