02-10-2013 09:33 PM
Hello!
Rather suddenly, my printer had the error message of 'print head not aligned / print head missing' to which I cleaned off the print heads [lots of gunk] and the error message went away. I printed a document and the error message reappeared. This time, taking the cartriges out and cleaning again, thinking it was a fluke. Whilst I was preparing to do a 'deep clean' of the heads via the troubleshooting guide the machine just shut off. I switched outlets, and even waited 30+ minutes before plugging in, but to no avail. It won't power on.
Any suggestions?
02-13-2013 03:28 AM
Hi amanda,
It sounds like something has happened to the printer that would require service. I would recommend using the Contact Us link to get in touch with tech support and they can go through the service options available.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.