01-11-2021 11:35 AM
How do I print on 5x4 or 3x5 cards with this printer? The paper tray only goes down to about 8x6 and so my cards do not sit squarely. Also I can't register these sizes on the printer.
I thought this was supposed to be a photo printer?
Thanks
02-17-2021 04:16 PM
Hi dorys,
There are 2 locations to load paper in your PIXMA TR520:
rear tray
- Minimum size: 2.17 x 3.51 inches (55.0 x 89.0 mm)
- Maximum size: 8.50 x 26.61 inches (215.9 x 676.0 mm)
cassette
- Minimum size: 5.83 x 8.27 inches (148.0 x 210.0 mm)
- Maximum size: 8.50 x 11.69 inches (215.9 x 297.0 mm)
To print on smaller sized paper, please us the rear tray.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.