10-07-2020 07:43 PM
I want to know how to take out the Canon MX490 printer's hard drives. This is because my information or data is on the hard drives. Thanks.
10-19-2020 04:24 PM
Hi aaron3,
The PIXMA MX490 does not have a hard drive and does not store any of your prints or scans.
You can reset your PIXMA MX490 to factory defaults if you like:
1. Press the wrench and scrwdriver button on your PIXMA MX490.
2. Use the left or right button to select Device settings and press <OK>.
3. Use the left or right button to select Reset setting and press <OK>.
4. Use the left or right button to select Setting data and press <OK>.
5. Use the left or right button to select Yes and press <OK>
6. Press <OK>.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.