11-22-2020 10:52 AM
I replaced the paper tray but didn't realize when I put it down the printer was too close to a pillow, causing the paper to jam when going back into the printer from behind. I cleared the paper, and turned the printer on and.off as instructed. The paper jam message was still there. I turned it off again, unplugged everything, double checked there was nothing inside the printer (i can see straight through to the other side), and then turned it back on. The paper jam message is still there. What can I do to fix it?
11-22-2020 11:20 AM
Greetings,
If you have removed the tray and checked / cleared jams or obstructions, the paper tray is probably not aligned properly. Try removing and re-seating it.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
12-17-2020 04:16 PM
Hi kwhite29,
Please contact one of Canon's Technical Support Representatives via phone or chat. To contact a Technical Support Representative, please use the link below:
https://mycanon.usa.canon.com
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.