12-30-2020 04:24 PM
My late friend left a unused Pixma MG2922 to me. I down loaded the software to set up Windows 10 & tried to set up. Of course it's past the support period & I'm abt to tss it in alley!
The green on light & the amber alarm light alternately flash twice. I checked the paper jams, none. Put new ink cartridges in correctly & removed the protective tapes. I've turned it off unplugged it, clx any printing jobs, & the cartridges clicked into place. I've turned it on again & led's continue to flash.
12-30-2020 05:38 PM
Two orange flashes separated by a long green flash means there is no paper in the tray that is selected. If there is paper, then the feed switch is probably set to the wrong source.
12-30-2020 05:45 PM
Thanks but the green on light flashes, then the amber light, then the green on light flashes & the amber light flashes. Then the light remains on for a few seconds. So to summarize green led, amber led, green led, amber led .
12-30-2020 08:24 PM
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.