09-12-2018 06:55 AM
HI all - my printer has stopped printing with black ink :
- we have canon inks
- i have done a 'deep clean' (but no paper came out, so puzzled, as it says it will use lots of ink & I assumed paper)
- done a test strip - all stripes fine, but no back at all
I have an appleMac using Sierra. All I can think of is that somewhere an operating system isnt right, but why has it only affected the black ink ??
all ideas gratefully received !
09-12-2018 09:14 AM
Hello.
If the issue persists after cleanings have been done, troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
09-19-2018 10:12 AM
Turns out the cartridge was blocked somehow - basic intervention with a tiny needle in the vent hole to allow air to enter + a rinse under the tap to clean/ moisten the ink pad worked a treat !!
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.