cancel
Showing results for 
Search instead for 
Did you mean: 

Pixma MG5320 prints differently with Safari and Firefox

JoeTheAuthor
Apprentice

When I go to print something from a website using Safari, the left side of the document is cut off.  However, if I use Mozilla Firefox, I don't have that problem.  I'm using Yosemite on my Mac Mini.  I've tried reinstalling the driver for my Pixma MG5320, but it doesn't seem to help.  Also, the default paper setting is an envelope I once used.  How can I get it to default to US letter?

Is there some way to set the margins?

 

Many thanks.

1 ACCEPTED SOLUTION

Hi JoeTheAuthor,

 

Please follow these steps:

 

 1.  Please open the item that you wish to print.

 

 2.  Click on File and then Print.

 

 3.  Click the Show Details button.

 

 4.  Select all of the settings that you wish to make as the default print settings.

 

 5.  Select Save Current Settings as Preset from the Presets drop down box.

 

 6.  Give this preset a name.

 

 7. To set as default, hold the Option key down when selecting this new preset.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

3 REPLIES 3

Michael
Product Expert
Product Expert

Hello.

 

When printing from the web, you may experience a cut off depending on how the page was formatted or the web browser that is being used.

 

To resolve this issue, please check to see if a 'Print' option is available inside or around the article or email you wish to print.  This should properly format the page for printing.

 

If you continue to have difficulties, please copy the text and then paste it into your desired word processing program for printing.

 

This didn't answer your question or issue? Find more help at Contact Us.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

You solved half the problem. But How do I change the default print option to US Letter?

Hi JoeTheAuthor,

 

Please follow these steps:

 

 1.  Please open the item that you wish to print.

 

 2.  Click on File and then Print.

 

 3.  Click the Show Details button.

 

 4.  Select all of the settings that you wish to make as the default print settings.

 

 5.  Select Save Current Settings as Preset from the Presets drop down box.

 

 6.  Give this preset a name.

 

 7. To set as default, hold the Option key down when selecting this new preset.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!