cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA MG7520 printing much too small in Chrome on Mac

doray
Apprentice

All of a sudden, Chrome pages print at about 1/4 size. This happens on multiple sites.

I'm printing to an older Canon printer (MG7520).

The same pages print properly from Chrome to a new Canon printer, and from Firefox and Safari to the old printer.
I've looked at all the settings under More Settings and tried printing with a custom scale of 100%.
I also cleared Chrome's cache. I restarted Chrome.
 
I tried deleting and re-adding the printer in System Preferences.
I tried printing in another user's account in Chrome on my Mac. The same thing happens: the printout is about 1/4 of the size it should be.
 
I deleted my Canon's printer driver, which macOS automatically re-added after I restarted the computer again. No luck.
 
Any help would be appreciated!
7 REPLIES 7

chriskarnold
Apprentice
Same problem. Started after I downloaded Big Sur OS. Have seen lots of people on Google with similar problem and NO ONE from Canon ever replies or has a solution.

meowtek
Apprentice

It's something weird with Chrome. Use another browser - I had the same issue trying to print from Mac to an older Canon printer using Chrome. Then I tried Safari and it printed correct correctly.

Ah! Thank you for this! I've been having this same issue on my Canon Pixma, attempting to print through Chrome on my Macbook. It's been driving me nuts!! Will be printing through Safari until I figure this all out...

ChuckWhelon
Apprentice

Same here

cvdhturner
Apprentice

Workaround is to select More Settings->Use System Dialog that is at bottom when you scroll down in More Settings.  Then it prints correctly.  Obviously Chrome is sending something wrong to the printer.  My guess is that it thinks that the paper size is 4x6 photo instead of Letter that I have configured.

This worked until Ventura and now Chrome doesn’t send a preview to the System Settings dialog for some reason.

I’ve been instead selecting More Settings > Open in Preview for now. Gets me the correct printing size and a nice preview as well.

Thank you, cvdhturner!! I wasted so much paper trying to solve this. It happened when my back up printer (also Canon) failed within the same hour and I was stuck with a deadline to print. Much appreciated.

I hope Chrome gets it worked out ASAP.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.