cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pixma MG2522 USB connectivity failure

Fla5183
Apprentice

After replacing the color cartridge the USB failed.  Initially the yellow Color Ink LCD was flashing and the green power LCD were flashing.  I had to pull power to the printer to get the tray to go to the middle.  I replaced the color cartridge and the power LCD remained solid green.  I then got a "USB device not recognized" error message on my computer.  I restarted the computer.  Restarted the printer and the same error message appears.  I tried reinstalling the printer software and the installation failed when it could not connect with the printer.

Has anyone seen a USB failure on this model printer before?

Frank

1 REPLY 1

Patrick
Product Expert
Product Expert

Hi Fla5183,

First, please perform a test of your printer.  Please load letter sized plain paper into your printer and turn your PIXMA MG2522 on.

Once on, please hold down the STOP button on the printer until the error light blinks 1 time and then let go of the button.

Did a test page print?  If so, we know that your PIXMA MG2522 is working correctly.

If the test page printed, I would need a little more information.

Are you using Windows?  If so, what version?
If you are using a Mac, what version of OSX is installed?

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!