10-26-2024 09:23 AM - last edited on 10-29-2024 10:40 AM by Danny
My Pixma iP8720 is not feeding paper correctly. I have set the guides to the size of the paper. Once the paper starts to feed it pulls to one side and feeds through crooked. This leads to damaged paper and an unusable print.
I've tried the software roller cleaner. After the cleaning is complete and it says to put 3 pages in to complete, take pages also result in a crooked feed.
10-29-2024 04:52 PM
Hi PrinterGuy44,
First, please look down through the paper path of your PIXMA iP8720 to check for foreign objects or jammed paper.
Next, please open the cover and follow the steps provided on this page from the manual:
If the paper still does not feed correctly, your PIXMA iP8720 would require service. If your PIXMA iP8720 was purchased less than a year ago, please contact one of Canon's Technical Support Representatives via phone or chat to obtain your in warranty options. To contact a Technical Support Representative, please use the link below to log into your My Canon account:
https://mycanon.usa.canon.com
Once logged in, click on your PIXMA iP8720 and then click on the Product Support button. When that page loads, click on either the Phone Support button or the Chat Support button to access support.
If your PIXMA iP8720 is out of warranty, you are eligible for Canon's Upgrade Program. This is for out of warranty units which have been diagnosed to require service, or for some reason are incompatible with a new or upgraded system. This option allows you a one-time opportunity to purchase a replacement product, discounted from the list price.
If you would like to take part in this option, please call our Sales Department at (866) 443-8002 Monday through Saturday, 9am to 9pm. Let them know you have been working with technical support and the Canon Upgrade Program was offered.
Did this answer your question? If so, please click the Accept as Solution button below so that others may find the answer as well.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.