Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA TS3522 Print in copy function on only 1/3-page information printing is OK


Print text in copier appears only on 1/3 of the page.......information printing from within appears full page normal.



Welcome to the Canon forum!

So that the Community can help you better, we will need to know of any error message you're getting and
 which operating system is running on your computer or other device (i.e. Windows or macOS and which version) Any other details you'd like to give will only help the Community better understand your issue. The forum is not intended for immediate support. If this is a time-sensitive matter, click HERE search our knowledge base or find additional support options HERE

Thank you!

Windows 11 version 22H2   An error number of 03 appeared at one time, and then another time no error number appeared.   All other printing functions such as the information on the machine and anything printed from the computer print full sheet.  Seems that only when I scan into the printer (to make a copy) the machine is printing on the  1/3 of the page and is printing only 1/3 of the page content.

Product Expert
Product Expert

Hi Dhlta! Thanks for posting in the Canon Community Forum. I see that your PIXMA TS3522 is only printing a third of the page that you are trying to copy.

I understand that the printer works normally when you print a document from your computer. Therefore, I recommend that you check the paper size on the printer’s display (the little screen on the printer near the buttons).

The printer’s display is divided into two halves: Upper and Lower. In the lower half of the display, you should see the paper size.

If you are printing on regular copy paper that is 8.5x11 inches, please make sure that you see “LTR” in the bottom half of the display. If you see KG or just the letter L by itself, you need to change it to LTR.

To change the paper size, you’ll need to press the PAPER SELECT button below the printer’s display. The symbol on the Paper Select button looks like a sheet of paper with a folded corner in the lower right. Just press that button repeatedly and stop when you see LTR in the lower half of the printer’s display. Then, press the OK button

If you need to see an illustration of the display and paper select button, please visit the following section of the manual (link below) and skip to step 7:

If the printer is still printing part of the page, please write back with answers to the following questions:

  • What size of paper are you trying to use when making copies?
  • What paper size do you see in the bottom half of the printer’s display? (example KG, L, LTR)

You may also want to visit the following sections of the manual for more information.

I hope this information helps. If it works, please click on the box that says "Accept As Solution" below this post. Thank you for choosing Canon.

03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.