cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA MX492

norristowndave
Contributor

My PIXMA MX492 does not scan multiple pages now using the document feeder. It worked before but now I only can use the surface only. It also does not allow multiple pages to scan using the Canon IJ scan utility. Only 1 page at a time. 

 

Any advice is appreciated as setting check or maybe reload scan utility ?

15 REPLIES 15

Patrick
Product Expert
Product Expert

Hi norristowndave,

 

When placing the document in the automatic document feeder (ADF), your PIXMA MX492 should beep.  That is the indication that your PIXMA MX492 recognizes that paper has been loaded in the ADF.  For more information, please use this link:

 

https://ugp01.c-ij.com/ij/webmanual/Manual/W/MX490%20series/EN/BG/bg-loading4300.html

 

Once the document is loaded, please use the IJ Scan Utility to scan.

 

Open the IJ Scan Utility and click the Settings button.  In Settings, click on Document Scan on the left side.  On the right, next to Select Source, please make sure that Document (ADF/Platen) is selected and click OK.

 

Click the Document button on the IJ Scan Utility to scan:

 

(Windows)  https://ugp01.c-ij.com/ij/webmanual/ScanUtility/W/MX490%20series/1.1/EN/SU/Top.html

 

(Mac OSX)  https://ugp01.c-ij.com/ij/webmanual/ScanUtility/M/MX490%20series/2.0/EN/SU/Top.html

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Thanks for the advice and answers. I checked the steps and settings but the auto feeder does not grab the paper, it did beep. Is there something to verify the document feeder is working?

Hello.

 

Are you using the "Document" option in the IJ Scan Utility program or are you using a different method to scan?  Also, are you using a Windows computer or a Mac?

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

getting Message also when trying to scan multiple pages from scanner top after the first page scanned ok, " failed to open a session on the device " whn select scan again. 

 

This used to work all the time for me but dont know what changed and why not now......

Yes, I selected the PDF document option. And yes I have a MAC computer

getting Message when trying to scan multiple pages from scanner top after the first page scanned ok, " failed to open a session on the device " when select scan again. What is triggering this error message. 

What version of OSX is installed on your computer?

 

To determien this, please click on the Apple in the upper left hand corner and then About This Mac.

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

version 10.15.2

Mac Catalina

And I downloaded the latest version printer driver from Canon for the MAC

Announcements