PIXMA MX432 blurred printing after paper jam

[tvisingardi]

I had a paper jam on my MX432 and since then my print is blurred, shadowing, double printing.

[tvisingardi]

I had a paperjam on my MX432 all-in-one and now I am getting blurred, shadow, duplicate letter printing.  I did a clean through the machine and I thought it realigned the heads and it is better however only 70%.

[Mpell · Accepted solution]

Typically after a paper jam the encoder strip gets dirty. Cleaning it usually resolves this issue. Heres how to check it. If you open up the front where the paper prints, theres a clear strip that goes from left to right (its right above the greasy metal strip). If the strip is dirty (typically with ink smudges), clean with a little bit of water and q-tips. BE GENTLE! And, be sure to UNPLUG the machine before proceeding. After cleaning do a test print to confirm.

[jwills2009]

Your advice worked like a charm. I was ready to drop my MX432 out my second story window until I cleaned the encoder strip and the printing returned to normal. thank you!

[Mpell]

You're welcome. Glad I could help.

[peterbeans]

Brilliant!!!

This worked for my MG3150. I tried everything and it was the last throw of the dice. Be careful, it's quite tight in there. 

Thanks. (I used a baby wipe, worked a treat).

[edc133inc]

Thank you. Mission accomplished! Spot on!

[M5_DESIGN]

WOW! 

That was too fast. Thanks alot!

They should have noted that on the troubleshooting brochure the printer comes with. 

We were this close to get a new one after spending 4 hrs cleaning, testing, aligning, and wasting precious ink etc... 

Anyone knows a cheapper way to refill these cartridges PG-240XL? $100/month in ink is getting ridiculous, or may be we need a more efficient printer. 

 - M5 Team

Custom Vape Drip Tips and Accesories

facebook.com/M5DCUSTOMS

[mirrorkitch]

Thank you, tried all night realigning nothing, cleaned it twice like you said new printer. Thanks again

[sportygirl13]

wow it worked I just wish i would of looked up this instead of trying to get it to work by printing out several pages plus waste of ink but you are a genius thanks for posting this issue.

Thanks you saved me from purchasing another printer