cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA MX 922

EAP
Apprentice

Getting Started PIXMA MX 922.  is now on hold; MP-101 paper does not fit as described.The images on section 3, images 3, 4 and 5 shows the paper as being flat, the reality is when I place the paper in the cassette it curves up. What am I doing wrong? Any suggestions?

1 ACCEPTED SOLUTION

MarkII
Rising Star

Hi EAP,

 

Try loading the paper in the lower cassette.  Keep in mind that your printer has two front cassettes.  An upper cassette is used for photo or specialty paper, while the lower tray is used for standard size paper, like the MP-101.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

1 REPLY 1

MarkII
Rising Star

Hi EAP,

 

Try loading the paper in the lower cassette.  Keep in mind that your printer has two front cassettes.  An upper cassette is used for photo or specialty paper, while the lower tray is used for standard size paper, like the MP-101.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements