11-11-2022
11:10 PM
- last edited on
11-12-2022
08:06 AM
by
Danny
I have PIXMA 6020 megatank and the print head has been problematic. Cyan got clogged right after purchase and I needed to flush the print head manually using a flushing kit. It got fixed and worked fine for several more months (but used only few times), but then photo color started to be very strange as if some color is not correctly coming out. I deep cleaned and I flushed again, this time all colors pretty deeply. The strange color ratio was fixed but the printed photos are so faint. I thought the flushing liquid thinnered the ink inside the print head, but this faint issue still is going on after more than 10 photo printings. Any solution ?
Should I replace the print head ? Is it CH-21R ? It's so hard to verify. Appreciate your help !
11-12-2022 07:06 AM
Greetings,
Your printer has a 1 yr warranty. Best option would be to contact Canon.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.