01-16-2023 04:09 PM - last edited on 01-17-2023 09:22 AM by Danny
When I print anything, there are "strips" of content that are much, much lighter than the stuff on either side. It looks like the roller might have lower spots where the ink doesn't coat the roller enough to print properly. Is this something I can fix, and if so, how?
01-18-2023 12:47 PM
Hi,
To begin troubleshooting, I recommend printing a nozzle check. Please click HERE for the steps. Once it prints, please take a picture and attach it to your reply.
If you are unable to attach it, please click the link in step 6 and let us know how you nozzle check looks compared to the example.
We look forward to your reply.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.