cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Need PIXMA MX490 Drivers for macOS Monterey

psebock
Apprentice

need drivers for macOS version 12.5.1 Monterey, where do I find them?

1 REPLY 1

JayC1
Product Expert
Product Expert

Hi psebock! Thanks for posting in the Canon Community Forum. I see that you have a Mac computer that is running macOS Monterey Ver. 12.5.1 and you need the drivers for your Canon PIXMA MX490.

 

To find the drivers and software for your printer, please visit the following website:

https://www.usa.canon.com/support/p/pixma-mx490

When the website opens, please click on SOFTWARE & DRIVERS to the right of the picture of your printer. Then, make sure that the website is detecting the correct operating system in the section titled DOWNLOADS. You should see the word MAC under Operating System and MacOS12 under version.

 

The website will show you 8 of 9 programs available for your printer. If you want to see the last one, scroll to the bottom of the list and click on LOAD MORE. For this printer, you need the MX490 series CUPS Printer Driver. If you intend to use it as a scanner, we also recommend that you download and install the ICA Driver and the IJ Scan Utility2. Everything else is optional.  

 

I hope this information helps. Thanks for choosing Canon.

Announcements
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!