03-11-2016 11:18 AM
It prints fine onto photo media or plain paper. However, when I try to print onto CD or DVD printable disks, after a long time with a "Processing" message, an error pops up saying that the printer is not responding. My workflow is as follows:
Set up the design in Image Garden
Select "Print"
Settings are:
Printer: Canon MX920 Printer
Paper Size: Standard disk 4.7" 120mm (small inner circle)
Media Type: Printable disk (recommended)
Paper Source: Disc Tray
Print Range: All
Print Position: Default
Advance Settings: No Correction
Click Print
Processing message appears for 15 to 20 seconds
Then the message appears "Printer not Responding"
03-14-2016 08:09 AM
Hi mwgraves10,
How is your PIXMA MX922 connected to your computer, with a USB cable or wirelessly?
Does the printer not responding error occur when printing a document or web page or does this error only occur when printing on CDROMs?
If this issue need to be resolved more quickly, it is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.