cancel
Showing results for 
Search instead for 
Did you mean: 

Multiple Issues With Canon Software For MX-922 on Mountain Lion (v10.8.4)

lgldsr
Apprentice

I have been in IT for 32 years as a Windows / Linux / UNIX Network administrator. I have yet to see as aggravating an issue as with the MX-922 and the software that is (allegedly) for the Mac. The O/S in use is v10.8.4 on a Mac Mini and WiFi is being used. There is no hard wired connection between the printer and the Mac.

At the onset, this printer will print docs created on the Mac. it will Scan providing the native Print / Scan (as found in System Preferences) is used. So we can rule out communication issues. On a side note it can be pinged as well.

However, note the following errors when using My Image Garden, Quick Menu and the Canon lj Scan Utility. The Canon Network Tool does recognize the printer (as it should since it is present).

The CD supplied with the MX-922 would not load, so I had to pull down the latest softrware from Canon's site. This was done on 15-AUG-13.

Again, any input greatly appreciated and many thanks!

Quick Menu Error.jpeg

 

Network Tool Locating Printer.jpeg

 

Canon LG Scan Utility Error.jpeg

Canon error.jpeg

3 REPLIES 3

lgldsr
Apprentice

Canon Tech Support: Can I have some assistance please?

Hi lgldsr!

 

If this is a time-sensitive matter, we would suggesting reaching our technical support team through the following link: Contact Us. The forums are not intended for immediate support.


Thanks!

MarkII
Rising Star

Hi lgldsr,

 

Based on the error you are receiving, it looks like the software thinks you are still connected with a USB cable.  In the IJ Scan Utility window, what appears for the Product Name?

 

figure: IJ Scan Utility

 

You should see something similar to Canon MX920 series Network....  If not, click the dropdown arrow to see if other devices are listed here.  Select the Network printer and attempt the scan again.

 

Check your print settings as well to ensure that the USB connection for your printer is not selected as the default device.  In your Print and Scan window,  verify what printers are installed.  If you see multiple instances of the PIXMA MX922 (or MX920 series), perform a test print with each device to determine which connection is using the LAN for communication, and which is still set for the USB. 

 

If this didn't work, or if you have any other questions, please feel free to Contact Us!

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM