cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX922 just started squeaking after printing complete

JustAnotherSoul
Apprentice

Any suggestions on what to do?

 

This printer is relatively new.

 

Thanks.

2 REPLIES 2

shadowsports
Legend
Legend

Greetings,

You need to figure out whats squeaking.  Feeding mechinism, ink carrier/delivery, rollers, etc

 

Start with a can of compressed air.  Clean everything.  Q-Tips with alcohol is another good tool.  White lithium grease applied (very) sparingly might help dependijgn on whats noisy.  Rollers usually have to be replaced.

 

Lots of plastic mounted on metal rods that use little "C" clips for retention.  Tolerances vary, squeaks happen.  Sometimes they are pretty hard to track down.   

 

 

~Rick
Bay Area - CA


~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It

Michael
Product Expert
Product Expert

JustAnotherSoul,

 

It would be best to contact our phone support group at 1-800-652-2666 from 10AM to 10PM EST Monday through Friday (Excluding Holidays).  A live agent will be able to listen to the sound that you described and go from there.

 

This didn't answer your question or issue? Find more help at Contact Us.

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements