09-28-2020 02:45 PM
My printer colors were fine until I had to change empty cartridges. Now, my blue is a sickly, faded robins egg blue. I know there's a way to fix this using my iPad because it happened before quite a while ago but I, obviously, don't remember how to fix it and I, unfortunately, didn't write down the solution (but will this time!). I seem to remember something about cleaning the rollers manually, but mentally I can't connect dirty rollers with bad color.
I have looked on every menu and tried every adjustments but still keep printing this ugly blue. Any suggestions would be greatly appreciated!
Thank you in advance!
09-28-2020 08:05 PM
Is the printer also connected to a PC or laptop?
Did you run a nozzle check to be sure all is OK?
Check that all the tape is removed from the cartridges.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.