01-07-2024 12:39 AM - last edited on 01-07-2024 08:06 AM by James_C
I have a Canon pixma printer 922
Printer works great with my Dell PC BUT it seems to receive the wrong wi-fi signal from my Mac Book Air because the wrong tray is activated- the upper one and not the lower one which is used for document printing.Apple support says that it is a glich with Canon and may need a driver upgrade. But again there is a connection but not the right one. Anyone with this problem and know how to correct .Thanks
01-16-2024 12:46 PM
Hi,
Please click HERE and on the support page that opens, change the MacOS to Ventura V13 Then you will want to download and install the MX920 series CUPS Printer Driver Ver. 16.70.0.0.
Once the driver is installed, go to printers and scanners and remove the current MX922 listed. Then add a print but when you do, check that next to "Use", the Canon MX920 series is selected(not Airprint or Secure Airprint). Then try to print again.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.