04-05-2021 02:44 PM
I went to print a #10 envelope; never had a problem before.
The envelope got jammed and is inaccessable from either rear of front. Cannot even be seen, so likely mangled inside. Is there any other way to get to and remove the jam?
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
EOS R5C - Version 1.1.0.1
EOS C80 - Version 1.0.2.1
12/18/2024: New firmware updates are available.
EOS C70 - Version 1.1.0.1
EOS C300 Mark III - Version 1..0.9.1
EOS C400 - Version 1.0.2.1
EOS C500 Mark II - Version 1.1.3.1
XF605 - Version 1.0.5.0
12/05/2024: New firmware updates are available.
EOS R1 - Version 1.0.1
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R5 - Version 2.1.0
EOS R6 - Version 1.9.0
EOS R3 - Version 1.8.0
EOS R7 - Version 1.6.0
EOS R10 - Version 1.6.0
EOS R6 Mark II - Version 1.5.0
EOS R8 - Version 1.4.0
EOS R50 - Version 1.3.0
EOS R100 - Version 1.1.0
Powershot V10 - Version 1.3.0
