05-23-2020 02:35 PM
Hi,
I successfully printed a photo, but then had a photo paper jam in the rear cover. I removed the jammed paper, now the printer won't print. It goes through the normal cycle-- but no ink is used except for very faint lines about 4 inches apart.
Same thing if I print a nozzel pattern
05-28-2020 03:21 PM
Hello.
If colors are not printing correctly, cleanings may be needed. Please visit the following link and compare the results with the nozzle check pattern that you printed.
Examining the Nozzle Check Pattern
If there are missing colors or white lines going through the colors, try performing one or two deep cleanings to see if this improves the output.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.