cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MG3500 not responding, what should I do?

omargn23
Apprentice

My MG3500 isn't working, when I'm about to print something it shows a message saying that the printer is not responding what should I do?

2 REPLIES 2

kahveen
Enthusiast

Hi omargn23

 

As I understand, that you have a printer MG3500 Series and the printer is not responding.

 

This issue might be driver related, 

 

Kindly provide me the following information,

1) Computer Operating System

2) Printer Connection Method (USB Cable or Wireless)

 

It could be due to the following reason,

* Setup was not done properly

* Windows update

* Disconnecting cable while printer in use

 

Rest assure that with a proper setup, the printer will be running as per normal again. 

 

Hope to hear from you,

 

Best Regards,

KahVeen

kahveen,

 

I am also getting the "printer not responding" message.  I've run the troubleshooter on the printer, and all tests come back positive (no problems).  

 

If you have any ideas, I would appreciate help fixing this.

 

Thanks.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.