02-24-2020 01:22 PM
Hello everyone who might have this problem of pages printing blank. Although I had done numerous nozzle check cleanings (which all the colors printed out perfectly), I didn't realize there should've been a black mesh design above the blue line on the printout.
I talked with a very kind (and patient) representative today and he suggested that I do a DEEP CLEANING. That did the trick. I've had my G4210 printer about 6 months and I don't do heavy printing, so if you have this problem and the black mesh design doesn't print in your nozzle check print, DO THE DEEP CLEANING! I have made a note in my printer folder so I have reference in case this happens again.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.