cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Error 5100 PIXMA TS9520

reneeburm
Apprentice

Hello, I am tryng to install my new printer (PIXMA TS9520) and right off the bat I get an error message 5100.  I have tried rebooting multiple times but I keep getting the same error message.  The inks are installed but I can't get past the error message.  I am looking for any help in getting me past this hurdle

 

Thanks

5 REPLIES 5

Greetings,

 

Things to check:

 

Ink carriage assembly

Ink tanks properly installed

Inspect all paper feeding mechanisms

Dirty encoder strip if applicable

Inspected the inside of the printer for any tape, shipping or packing materials

 

If all else fails, pack it up and exchange it.  Its brand new. 

 

 

~Rick
Bay Area - CA


~R5 C (1.0.2.1) ~RF Trinity, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring

~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It

Thanks

 

I checked to make sure all of the orange tape has been removed, all ink tanks are installed properly (even though I got this message before the ink tanks were installed), paper feed mechanisms look fine (I haven't used them yet and nothing looks to be obstructing it), not sure what the encoder strip would be and I hate to mess with what I don't know.

 

I will try to get a hold of the company and get this returned.

 

I appreciate your feedback.

Hi reneeburm,

 

Your PIXMA TS9520 may require service.  It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:

http://Canon.us/ContactLI

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Please let us know what you find.  I am considering buying that model.

Just for my curiousity I followed the service link supplied to see what might be involved (in case I needed service someday).  Many links later I found a place to enter my zip code to locate a service center.   It didn't come up with anything.  Just got this generic support info link with phone numbers.   Why couldn't they have supplied such a  link in the earlier reply to actually assist you more directly.    Maybe your zip code will do better.

 

https://www.usa.canon.com/internet/portal/us/home/support/service-repair/servicelocation?locations 

 

I also was poking around on google "Canon Printer Error 5100" and there are tons and tons of issues.   Not feeling good about buying another Canon.   My current Canon is 10 years old and still wonderful.  Maybe I'll just stick with it.

 

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.