03-22-2015 05:41 PM
I have a Canon MX920 printer. Recently reinstalled drivers. I replaced a Canon ink cartridge with a "knock-off" which was instantly recognized. All ink levels look good on the printer read-out. Documents are blank when printing function is completed. What can be the problem? If the problem was with the cartridge - why wouldn't that problem be recognized? Thank you -
Solved! Go to Solution.
03-22-2015 06:42 PM
I am replying to my own post. It appears that the knock off ink is just fine. The printer erroneously did not report that the ink level was too low on my large black cartridge. Fixed!
03-22-2015 06:42 PM
I am replying to my own post. It appears that the knock off ink is just fine. The printer erroneously did not report that the ink level was too low on my large black cartridge. Fixed!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.