09-13-2021 09:05 AM - edited 09-13-2021 01:35 PM
I have a Pixma ix6820, and I'm trying to print with original ICC profiles
E.g. Canon ip6000 series MP2, GL2, GL3, PT1, PT2 PT3, SG2/LU2, SG3/LU3
PT1 (for platinum paper is Ok)
but when I print with GL2 (glossy II) it's not enough
it gives me visible noise patterns in the gradients, I believe because it's not for the highest quality ,
I use Photo Paper Plus Glossy II in the settings, High print quality (I cannot select the highest value like with PT1)
I don't have such issues with PT1 profile so I deciced to find a GL1 profile to improve the gradients but couldn't find it.
So does the GL1 profile (or MP1) exist at all?
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.