04-29-2015 06:04 AM - edited 04-29-2015 06:27 AM
Hi I have an Canon ipf 4600 Large format printer, it doesn't get a lot of use, it is just 13 months old, I try to use it once a month and run off a few 24 x 36 inch posters
Today I run it up as per normal, it always completes a cleaning cycle before use and a Nozzle check which completed as per normal.
However the first print I did I noticed small random black ink spots on the print, they were still wet and about the size of a small pin head about 1 -2 mm diameter these continued all down the print about 10 on a sheet of 24 x 36 poster.
On the second print I didn't see any further ones? 🙂
Previously I had installed a new 130ml Black (BK) cartridge, could changing this for a full one caused this to happen?
Thanks
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.