12-31-2020 06:24 AM - edited 12-31-2020 06:57 AM
Hi all,
I am using an ix6850 to print black transparencies for screen printing, never had any problems before. Then half way through a print it stops printing the jet black i need, I replaced the small black cartridge because it was spent but it won't print black from photoshop or illustrator only if I do a nozzle check does it print jet black, perfectly. We've messed around with colour profiles but nothing works. I'm begining to think it isn't a problem with the ink cartridge itself but a problem between the cartridge and the actual printing bit ( no idea what it would be called ) as when the printer was left overnight it printed a bit of the halftone before it gave up and returned to grey?
Just to add I've just discovered it can print jet black if it thinks its doing it on plain paper. It just won't do it in any of the usual modes for glossy paper?
Any idea what we could do?
Cheers,
Cat
04-10-2021 02:02 PM
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.