05-09-2016 07:36 PM
My one month old MG3520 decided to pull in about 15+ pages at once. After removing them, the printer now prints in a wavy fashion. The lines all wave horizontally in a downward direction. Is there a fix or did it get damaged with the multiple paper feed?
Solved! Go to Solution.
05-10-2016 05:51 PM
Thanks to Canon's customer service, I was able to fix this. There is a thin strip of clear plastic (about a 1/4" wide and the length of the printer) that is in front of a metal bar (behind where the ink cartridges ride). If that gets smudged with grease or fingerprints, it causes the wavy printing.
Cleaning the plastic strip with Windex and a Q-tip fixed it and it is now printing like it should. Thanks Canon!
05-10-2016 05:51 PM
Thanks to Canon's customer service, I was able to fix this. There is a thin strip of clear plastic (about a 1/4" wide and the length of the printer) that is in front of a metal bar (behind where the ink cartridges ride). If that gets smudged with grease or fingerprints, it causes the wavy printing.
Cleaning the plastic strip with Windex and a Q-tip fixed it and it is now printing like it should. Thanks Canon!
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.