Canon Pixma MG2922 Green Power Light Flashing

[Stryder64]

I go to print anything and this is what is going on. The power light is constantly flashing while powered on, saying it's busy processing something.  I then turn it off and then on again, it will print what I wanted, and then the green power light will go back to flashing.  Request to print something after that, and I will have to repeat the whole process.  Turn it off and on again, and it will print what I wanted, then back to flashing green light.  

[BillS]

Hi Stryder64,

The MG2922 printer's power light will blink continuously if the access door is open or slightly ajar. Make sure the door is completely closed and then press the black or color start button to clear the blinking.

This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

[Stryder64]

Thanks BillS, but it's still doing the same thing.  Started it up again after checking the front door and the green power light started  blinking again like it was busy.

[James_C]

Hi Stryder64,

To resolve this issue, please follow the steps outlined in both videos provided below:

http://ugp01.c-ij.com/ij/webmanual/Manual/W/MG2900%20series/EN/UF/movie/mg2900-06-1/video-player.htm...

http://ugp01.c-ij.com/ij/webmanual/Manual/W/MG2900%20series/EN/UF/movie/mg2900-06-2/video-player.htm...

If you continue to have difficulties, please contact our support group using the following link:

http://Canon.us/ContactLI

[Stryder64]

Looks like I'm going to have to call Canon support.  That didn't work either.  Send document to printer/green light blinking and won't print/turn printer off for one minute/turn on and document prints/green light goes back to blinking.

[CanonMG2922]

Hi - 

I'm having the same issue. 

Blinking both green & orange lights.