08-31-2019 05:58 PM
I have a problem to print any picture or photo. For about 9-10 cm print is sharp and clear, after - blury. I printed test pages for Magenta, Cyan, Yellow and Black separately, same problem wih all of them.
Any sugestion welcome
09-06-2019 12:26 PM
Hi piotrolia,
Please make sure that you are using genuine Canon ink tanks in your iP7220.
Next, please perform 2 or 3 printhead cleanings. To do this, please hold down the Resume/Cancel button until the Power light blinks 1 time.
If the issue persists, please clean the encoder/timing strip:
https://support.usa.canon.com/kb/index?page=content&id=ART133115
(please note, the article lists a different model, but hte steps are similar)
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.