cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon G4610 ink tank printer not printing black ink

Kell
Apprentice

Hi All

 

My printer is not printing any black ink when I try to print a document, yet when I run tests the ink prints fine. Can anyone help to solve this issue at all?

1 REPLY 1

Darius
Whiz

Hi Kell.

 

If the black net pattern is appearing on the G4610's test print sheets, then the black ink itself is flowing properly.  Check the print settings in the software from which you're printing, or try printing from a different program.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Announcements
08/18/2023: Canon EOS R5 C training series is released.

07/31/2023: New firmware updates are available.

CR-N700 - Version 1.2.0

CR-N500 - Version 1.3.0

CR-N300 - Version 1.3.0

CR-X300 - Version 1.1.0


06/30/2023: New firmware version 1.0.5.1 is available for EOS-R5 C

05/31/2023: New firmware updates are available.

EOS R6 Mark II - Version 1.1.2

EOS R6 - Version 1.8.2

EOS R7 - Version 1.3.1


05/18/2023: New firmware updates are available.

EOS Rebel T100 - Version 1.1.0

EOS Rebel T7 - Version 1.2.0

EOS 5D Mark IV - Version 1.4.0

EOS 6D Mark II - Version 1.2.0

PowerShot Elph 360HS - Version 1.1.0.0

PowerShot SX420 IS - Version 1.1.0.0

PowerShot 620 HS - Version 1.1.0.0

PowerShot SX720 HS - Version 1.1.0.0

PowerShot G1X Mark III - Version 1.1.0.0

PowerShot G7X Mark II - Version 1.2.0.0

PowerShot G9X Mark II - Version 1.1.0.0

 

04/20/2023: New firmware version 1.4.1 is available for EOS R3

03/30/2023: New firmware updates are available.

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10


02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5