06-05-2020 05:07 PM
Hello,
I recently installed new cartridges 240 and 241 in Pixma Mx472 printer.
It prints wavy print.
I have done Cartridge Print Alignment - Manually and System Driven - number of times without any avail
Could Bad Print Cartridge create misalignment?
By the way, I updated Firmware prior to installing Cartridges - Could that be 'cause of misalignment?
Solved! Go to Solution.
06-10-2020 03:23 PM
Hi gsk8,
Based on your description of the issue that you are experiencing, it would appear as though the encoder/timing strip is dirty and would need to be cleaned. To perform this, please follow the steps outlined in the following Knowledgebase Article available from Canon's web site:
https://support.usa.canon.com/kb/index?page=content&id=ART143651
06-10-2020 03:23 PM
Hi gsk8,
Based on your description of the issue that you are experiencing, it would appear as though the encoder/timing strip is dirty and would need to be cleaned. To perform this, please follow the steps outlined in the following Knowledgebase Article available from Canon's web site:
https://support.usa.canon.com/kb/index?page=content&id=ART143651
06-11-2020 03:04 PM
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.