09-28-2020 05:22 PM - edited 09-28-2020 05:30 PM
Hi,
I have Canon MX922. Offlate the printer prints blank pages with just a few streaks in between.
I tried cleaning the print head, and performed a copy. The printer now prints sheets with black lines through out (as shown in the picture).
I performed a nozzle clean up and head alignment - after doing so, the printer is back to printing blank pages with a just a few streaks.
I am using the official inks and good quallity paper. I have tried cleaning and deep cleaning. I have also cleaned the print head multiple times. All the ink catridges are full.
Any help would be appreciated.
Thank you.
10-19-2020 04:00 PM
Hi ddevaraj,
Cleaning the encoder/timing strip should resolve the printing issue that you are experiencing. To clean the encoder/timing strip, please follow the steps outlined in the following Knowledgebase Article available from our web site:
https://support.usa.canon.com/kb/index?page=content&id=ART142447
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.