09-03-2021 02:47 PM
All of a sudden my printer will print in any colour except black, I've run half a dozen deep cleans, run the check nozzle, it appears as though Black: PGI-525PGBK is the culprit if the nozzle check is to be believed.
I swapped out a 3/4 full tank, with a brand new one, just to make sure.
09-03-2021 03:00 PM
Welcome to The Canon Community, and thank you for your inquiry!
We appreciate your participation. However, we need to let you know that the Canon Community is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market. The PIXMA MG6250 isn't sold or supported by our team here at Canon USA, nor do we support PGI-525PGBK.
If you live outside the United States, please CLICK HERE and select your country or region for your support needs.
You're welcome to discuss Canon products sold outside the United States, but please be aware that you will not receive support directly from Canon USA.
09-03-2021 05:26 PM - edited 09-03-2021 05:27 PM
Thank you for responding.
I'm in Australia, I appreciate being allowed to post a question.
Okay so the Pixma MG6250 isn't sold in the USA, it is still a Canon product isn't it?
I have been reading posts varying models, that are all experiencing the same problem.
Is there no general guide for this problem?
09-03-2021 05:36 PM
No, because different models have different menus. We recommend reaching out to support in your region for immediate technical support.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 188.8.131.52
PowerShot SX420 IS - Version 184.108.40.206
PowerShot 620 HS - Version 220.127.116.11
PowerShot SX720 HS - Version 18.104.22.168
PowerShot G1X Mark III - Version 22.214.171.124
PowerShot G7X Mark II - Version 126.96.36.199
PowerShot G9X Mark II - Version 188.8.131.52
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.