cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

3,202,55 error Scanning on Canon TR4720

KalishC
Apprentice

Network scanning is unreliable and fails with a 3,202,55 error. I have

  1. Removed and reinstalled all drivers
  2. Hard reset the printer / scanner
  3. Reset the wifi settings (75% signal)
  4. Firmware is all up to date on the device
  5. Rebooted windows client

It scans with USB connection, but gets a network error whenever I scan (it is able to start the scanner, but dies in the middle of the scan with the 3,202,55 error). I can print over the network and I can attach to the remoteUI (https://). The network scanning fails if initiated from the printer panel or through the client (FoxIt PDF).

Running Windows 11 with all patches on the client.

Please help!

6 REPLIES 6

ArthurJ
Product Expert
Product Expert

Hi,

To try and narrow down why this error appears, we can try scanning from another device. This will let us know if there is a network issue with the printer. 

If you have a smart phone or tablet, you can use the free Canon print inkjet selphy app. Once the app is installed, make sure the device is connected to the same network as the printer and then the app will search for the printer. 

Once the app detects the printer, please use the scan feature in the app and let us know if you were able to scan or if a error pops up. 

We look forward to your reply. 

I can scan successfully from selphy, but it will not complete the scan to PC. The PC does connect to the scanner (is able to start the scan and is able to print, for instance), but cannot scan to the PC.

Thanks.

Hi,

Are you scanning directly from the printer or using IJ Scan Utility on the computer? 

We look forward to your reply. 

The failure happens when I scan directly from the printer and when I use FoxIt PDF and scan using the device.

Hi,

If you can as a test, please try using the Canon IJ Scan Utility. When the program opens, make sure the printer is listed as TR4700 series network and then try to scan. Let us know if any error appears when using IJ Scan Utility. 

We look forward to your reply. 

Sorry. I thought I had mentioned that scanning directly through ljscan works.

Announcements

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.