cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Video and Audio out of sync ( lag) with Zoom, Youtube Live, Facebook Live and Google Hangouts

Doctrine
Apprentice

I have a new 250D (SL3) that I've connected to my PC laptop via USB cable.  I have the EOS Utility and want to use it as a web cam for Zoom, Facebook Live, Youtube Live, Google Hangouts, etc.  

 

There is a noticeable lag between the video and the audio.  They are not in sync.

 

Does anyone else have this problem?  How did you solve it?

 

Are there camera settings that I should be change (FHD at 30fps)?

 

I appreciate anything you guys can tell me!

10 REPLIES 10

DadGotThis
Contributor

I am having the same issue with my M6 Mark II. The funny thing is that my old T5i which is not supported worked fine with no lag. The M6 Mark II which is supported has a lag. It is like a milisecond and very annoying. 

 

I tried it in 4K, and Full HD and both have it.


@DadGotThis wrote:

I am having the same issue with my M6 Mark II. The funny thing is that my old T5i which is not supported worked fine with no lag. The M6 Mark II which is supported has a lag. It is like a milisecond and very annoying. 

 

I tried it in 4K, and Full HD and both have it.


Are the audio and video "in sync" when you use the built in camera and microphone in your laptop?  In most laptops, they are out of sync by a hair.  Do not blame the EOS Webcam Utility for not correcting a pre-existing flaw.

--------------------------------------------------------
"The right mouse button is your friend."

absolutely, there is a MASSIVE difference when using EOS versus internal laptop camera

ndutton
Apprentice

Yes this is so frustrating, I know this camera is good but there are a number of shortcomings.

The USB approach definately is a challenge as i often feel like i have to get the planets in alignement so that Zoom (or the EOS utility for that matter) actually sees the camera. Then when it does get seen the sync is awful.

 

I then went with a cheap HDMI capture card and that did make the sync better it wasnt perfect and the 80D also doesnt offer 'clean HDMI'. Now you can tweak the display to turn off all overlays except the autofocus square. So for that we have to use manual focus!!! I am the other side of the lens why do i need that square?

 

I've often found canon's software is 90% perfect but i always run into that 10%. Many other cameras out there score 70% in the software but i never need the remaining 30% - my luck!

 

Well i decided to go to a much higher end capture card (arrives in 2 days), if that solves the sync problem all good. If it doesnt, i guess the refund of the capture card will go along way to another camera which i hate the idea of doing because it opens the door for something other than Canon.

DadGotThis
Contributor
I grabbed a cheap HDMI capture card and it is much better than the utility. I agree it is probably not perfect but works. The M6 Mark II does have clean HDMI out, it’s just a setting.

DadGotThis
Contributor
Yes I have tested the FaceTime camera and different mics and they are all fine. I think the issue is it just pulls video and no audio.


@DadGotThis wrote:
Yes I have tested the FaceTime camera and different mics and they are all fine. I think the issue is it just pulls video and no audio.

Wasn't that fact obvious?  The Webcam Utility Beta is a substitute for just the camera found in most laptops.  

--------------------------------------------------------
"The right mouse button is your friend."

DadGotThis
Contributor
Yes but those somehow manage to sync the audio and video. I have been able to use an external webcam and my USB blue Snowball mic and everything is in sync.

The only way I was able to get audio and video in sync with the M6 MarKII was to use an HDMI capture card and a shotgun mic plugged into the camera.

DadGotThis
Contributor
The utility and the blue snowball mic had the audio way out of sync.
Announcements

03/30/2023: New firmware updates are available.

EOS R3 - Version 1.4.0

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10


03/28/2023: New firmware version 1.0.3.1 is available for EOS-R5 C
03/14/2023: New firmware version 1.8.1 is available for EOS R6
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.