cancel
Showing results for 
Search instead for 
Did you mean: 

Using multiple cameras with ImageBrowser EX

jjhodges
Apprentice

I just downloaded and installed ImageBrowser EX on a new MacBook Pro and it connects to my T3i just fine.  However, I am unable to connect to my PowerShot 500 IS and keep getting a message that there is no camera connected to the computer.  Using the PowerShot on an older MacBook is no problem.

How can I set up ImageBrowser to work with both of these cameras?

1 REPLY 1

Mykolas
Authority

Hi jjhodges!

 

Thanks for posting.

 

The program that is used to connect to the EOS Rebel T3i is different from the one that is used to connect to the PowerShot SX500 IS.  What version of the Mac OS are you running?

 

If this is a time sensitive-matter, additional support options are available at Contact Us.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM