10-21-2015 10:33 AM
I have a Canon rebel T3i 600D. I use it to make pictures under standard conditions in a photobox with my computer.
Before every shots, I make a Test Shot to check the white balance. But, I don't know why, today when I click on the "Test Shot", an error message appears, and the lonely indication is "BUSY".
However, I didn't change any parameters since a long time.
If somebody had this problem, could you help me please?
Thanks you for the time you will take for me.
10-23-2015 09:03 AM
What happens if you use the camera without the computer, hand held? Do you still experience the same issue?
What is telling you "busy", the camera, the software, or both? When do you see "busy", before, during, or after you snap a picture?
Have you checked your camera settings to be sure that nothing has been accidentally changed? My fumbling fingers change camera settings all of the time, thanks to that spinning wheel on top of the camera.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.