01-11-2023
06:23 PM
- last edited on
01-12-2023
08:31 AM
by
Danny
Hello,
I have had this problem (see on the screenshot below) so many times! I use a Canon 5Dsr and the EOS utility version is 3.14.30.4.
Please let me know if any other information is needed and how I can solve this problem. The camera is used to automatically take pictures during a laboratory test, so every test it get disconnected (almost every test!), we lose a lot of data!
06-11-2023 06:00 PM
Is the camera automatically powering off?
06-11-2023 07:51 PM
How long does a laboratory test run normally last?
How are you triggering the camera?
What version of Windows are you running?
Have you tried updating to the latest camera firmware and EOS Utility software?
Have you changed any of the power settings from their factory defaults?
Are you using a Canon USB cable? They utilize baluns, while third party cables do not.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.