08-07-2024 09:36 AM
I use Fv with auto ISO, auto aperture, auto shutter speed and ETTL flash.
before Feb, include Feb, the auto f stop can be correctly set as f2.8 automatically.
but from Mar, it always set f4 as priority, and ISO often go to 6400.
today, 2024-Aug-07, I went to a shop to try another two R6 Mark II,
what I found is, if the firmware version is 1.1, auto aperture works normal, but if the firmware version is 1.4, the auto aperture will be f4 for most of the situation, except very low light, it can be f2.8
08-07-2024 10:37 AM
What is the problem?
08-07-2024 11:16 AM
It was common for DSLRs when set to P or A+ Modes. To set exposure settings to 1/60th F/4 ISO 400. If the lens had a maximum aperture of F/5.6 it would just change the aperture to that. But the camera uses Fill Flash in those modes. So all the camera did was adjust flash output in E-TTL Mode regardless of the aperture set.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.