04-05-2024 11:56 AM - last edited on 04-05-2024 12:00 PM by Danny
Hello, I have a EOS Kiss X10 Rebel SL3 200D II and MOVO 2.4GHZ Wireless Microphone System, when I record I hear a humming sound. Anyone know how I can fix this?
04-05-2024 12:29 PM
Do you have anything else connected to the camera?
Does it happen when you use the built in mic?
Is your external mic stereo? I believe the mic jack is for stereo mics.
What do the audio level meters say?
04-05-2024 12:46 PM
thank you for responding! I only have this connected to the camera. the audio levels seems standard not higher than 12, I notice there is no humming when I don't use the mic
04-09-2024 05:34 PM
i did, didn't make a difference. i noticed there is a little picture of a microphone that says off on the screen. but i don't know how to turn the microphone on, already checked the camera's digial manual
04-09-2024 05:36 PM
That icon is saying the wind filter is off, not the microphone.
04-08-2024 04:34 PM
there is no humming sound with the built in mic 😮
04-08-2024 04:41 PM
Did you turn off the camera's Wifi as the little box says?
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.